Threads for jeans. What threads are best for sewing jeans, and what technique to use to bypass thick seams? How to sew thick denim

I often sew from denim and always want the seams to look as "factory" as possible. Alas, it is not possible to imitate a factory double stitch on a household sewing machine, but it is quite possible to make a decent double stitching.
Many who tried to sew with special denim threads faced difficulties - the machine skips stitches, loops on one of the sides of the fabric, and so on. It was like that for me too. But then, after reading through several sewing forums, I found a number of tricks that finally reconciled my machine with thick denim threads.

The first trick is threads
A thick decorative thread is used only as a top thread, we thread a regular thread into the bobbin,for example, reinforced thread flax-lavsan No. 45. The upper thread tension needs to be slightly loosened.

Trick two - needle position
The most common problem with sewing jeans is skipped stitches on thickenings, for example, when sewing jeans at the seams. This happens because the needle does not have time to pierce the thick tissue. As a result, when the needle with the upper thread enters the hook, it has already turned and the upper thread does not cling to the lower one. In order to avoid this, you can put the needle a little lower!Not all the way!I know, the thought sounds seditious, I was always taught to insert the needle all the way, otherwise ... well, something terrible and irreparable will happen to the typewriter. But no, it turned out to be a little different.

Here is the position of the needle in my machine when sewing jeans. And no skipped stitches!!!

The third trick for an even delay is a foot with a guide
Different manufacturers call these paws differently, but the essence is the same - the presence of a guide, the position of which can be adjusted.


I have this one. Naturally, the rubber band is not included. This is my copy from a long operation loosened :))
The stitching is done sequentially. Those. first, the seam is close to the edge, then, the second is parallel to the first. So that the stitching width is the same on the entire product, in the process of stitching the first decorative seam, I mark the stitching width directly on the foot. In this case, the red dot corresponds to the first line, the blue dot to the second. Very comfortably.

And finally, not tricks, but rather reminders:

• Jeans are sewn with a thick needle No. 100, preferably a special denim needle. Such a needle has a special shape of the point, which makes it easier to pierce thick tissues.


• A pretty well-known feature, but repetition is the mother of learning. If you need to flash a thickening, for example, the intersection of several seams, you should try to make this place thinner - steam it with an iron or soften it by hammering it. Do not overdo it with a hammer, otherwise you can ruin the fabric.


• P When passing through a bulge at a time when the foot is hanging in the air, clinging to the bulge, and the needle is already piercing a thin area, skipped stitches and a violation of their length can often also occur due to the fact that the foot does not press the fabric at that moment. With such a transition, it is possible to pre-place paper folded in several layers under a thinner section, equal to the thickening in height. Of course, next to the seam, just to give support to the foot. When the presser foot has passed the thickening and has completely moved to the thin section, the paper can be removed and sewing can be continued as usual.

Good luck sewing your jeans! I hope these tricks will save you nerves and time :))

How to sew thick denim, stitching jeans

Very practical tips for sewing denim from the Vilvetka needlework blog. Author's words.

I often sew from denim and always want the seams to look as "factory" as possible. Alas, it is not possible to imitate a factory double stitch on a household sewing machine, but it is quite possible to make a decent double stitching.
Many who tried to sew with special denim threads faced difficulties - the machine skips stitches, loops on one of the sides of the fabric, and so on. It was like that for me too. But then, after reading through several sewing forums, I found a number of tricks that finally reconciled my machine with thick denim threads.

How to sew thick denim, stitching jeans">

The first trick is threads

A thick decorative thread is used only as an upper thread; we thread an ordinary thread into the bobbin, for example, reinforced thread flax-lavsan No. 45. The upper thread tension needs to be slightly loosened.

Trick two - needle position

The most common problem with sewing jeans is skipped stitches on thickenings, for example, when sewing jeans at the seams. This happens because the needle does not have time to pierce the thick tissue. As a result, when the needle with the upper thread enters the hook, it has already turned and the upper thread does not cling to the lower one. In order to avoid this, you can put the needle a little lower! Not all the way! I know, the thought sounds seditious, I was always taught to insert the needle all the way, otherwise ... well, something terrible and irreparable will happen to the typewriter. But no, it turned out to be a little different.

Here is the position of the needle in my machine when sewing jeans. And no skipped stitches!!!

The third trick for an even delay is a foot with a guide

Different manufacturers call these paws differently, but the essence is the same - the presence of a guide, the position of which can be adjusted.

I have this one. Naturally, the rubber band is not included. This is my copy from a long operation loosened :))
The stitching is done sequentially. Those. first, the seam is close to the edge, then, the second is parallel to the first. So that the stitching width is the same on the entire product, in the process of stitching the first decorative seam, I mark the stitching width directly on the foot. In this case, the red dot corresponds to the first line, the blue dot to the second. Very comfortably.

And finally, not tricks, but rather reminders:

Jeans are sewn with a thick needle No. 100, preferably a special denim needle. Such a needle has a special shape of the point, which makes it easier to pierce thick tissues.

A pretty well-known feature, but repetition is the mother of learning. If you need to flash a thickening, for example, the intersection of several seams, you should try to make this place thinner - steam it with an iron or soften it by hammering it. Do not overdo it with a hammer, otherwise you can ruin the fabric.

When passing through the thickening at the moment when the foot hangs in the air, clinging to the thickening, and the needle is already piercing a thin area, skipped stitches and violation of their length can often also occur due to the fact that the foot does not press the fabric at that moment. With such a transition, it is possible to pre-place paper folded in several layers under a thinner section, equal to the thickening in height. Of course, next to the seam, just to give support to the foot. When the presser foot has passed the thickening and has completely moved to the thin section, the paper can be removed and sewing can be continued as usual.

Good luck sewing your jeans! I hope these tricks will save you time and nerves.

Do you know how to choose sewing machine needles? There is a large selection of machine needles in sewing stores, how to choose the right one and how many should you have in your arsenal. This will be discussed in this article.

Universal — suitable for all kinds of woven fabrics, choose the needles according to the density and thickness of the fabric. It is also important to select the appropriate thickness of the thread with which you sew. But this is material for the next article.

Knitwear needles — they can and should be used to sew knitted fabrics, fabrics with a thick pile, fleece fabrics, etc. These needles have a rounded tip that does not pierce, but spreads the threads during use, which helps protect against damage, you must have encountered the problem when holes form on the side seams of knitwear. This is a consequence of the mismatch of the needle or a blunt needle.

Stretch and super stretch needles — has an elongated shape to prevent skipped stitches, ideal for fabrics containing lycra elastic used in swimwear and underwear.

Denim needles — Of course, you can use a universal needle, but jeans needles have a sharp, strong tip that easily passes through dense fabric. They are suitable not only for jeans, but also for canvas and many raincoat fabrics. You should not take too thin ones, No. 100, No. 110 are quite suitable for your arsenal, and if you find then No. 120.

Leather needles — are ideally suited for genuine leather and a leather substitute. The flattened tip easily penetrates the skin without leaving large holes. And on the reverse side, for example, when stitching the bead, your product will not have sloppy punctures through which you can see the unpainted “inside of the leather skin”. Here, the size of the game can be different based on the thickness of the skin No. 80, No. 90, No. 100, No. 110. Or you can purchase a set of needles with different numbers.

Sharp or needles for fine and silk fabrics - very sharp and elongated tip suitable for chiffon, silk, microfiber fabrics and other densely woven fabrics, as well as for processing buttonholes. You will need needles of all sizes from #60 to #90.

For finishing - the large eye is designed for thick finishing thread and the super sharp tip of the needle makes it easy to pass through layers of fabric that are dense in several folds. It is better to stock up on #90, #100 and more.

Embroidery and titanium super strong needles - have a nickel-plated finish and a large eye that allows a smooth silk thread to glide at high speed without breaking. Worth having #75, #80, #90.

For metallic thread - remarkable in that it has a large nickel-plated eye that provides sliding at all speeds of the sewing machine and a large groove on the needle shaft that prevents delamination and thread breakage. Buy #90 or more.

For quilting - The sharp and long tip ensures even stitches on cotton fabrics with a wadded lining. Better to have #90 or more in your arsenal.

Double - fixed in a polyamide block, sold one per pack and have a different distance between the needles from 2 mm, 2.5 mm, 3 mm, 4 mm and 6 mm. They are classified for jeans, stretch and metallic thread. Using at a low speed, according to the fabric and needle number, they will last longer.

For hemstitching Plates on both sides of the needle help create the wider hole required for decorative stitching.

self-dressing - universal needles with a slot in the eye, the thread refuels itself if it is smoothly guided down along the needle. But don't get carried away with them. They break and can fail on fabrics with pile.

To sum up - sew with needles corresponding to the chosen material, choose the thickness of the needle according to the thickness of the fabric. And most importantly - do not sew with blunt needles, you should not save on the quality of the manufactured product. After all, hooks and thread pulling do not paint a thing.

Be professional in everything! Let this article help you choose the right one. sewing machine needles.

I would be grateful if, when copying my articles to your website, blog, personal page or diary, you provide a link to the source.

Denim (hereinafter referred to as jeans) is a dense cotton material that is designed for long wear. In addition to cotton, lycra and polyester may be present in the composition. For sewing clothes from jeans, special threads and needles of increased strength are used.

Properly selected sewing threads will facilitate the work and make it possible to obtain a quality product with even and beautiful seams.

Variety of threads

According to the composition of the thread, there are natural, chemical and combined. The first type consists of linen, silk, cotton. The second group contains artificial and synthetic fibers (polyamide, polyester, viscose, polynose). Combined threads are formed from natural and chemical fibers.

Types of sewing threads:

• cotton (suitable for almost all types of fabric, produced under numbers from 10 to 120, depending on the thickness);
• polyester (made from synthetic fiber, suitable for creating finishing stitches, have high strength):
• reinforced (consist of a lavsan rod and various fibrous braid, have increased strength and elasticity, are considered universal);
• silk (suitable for embroidery and decorative finishing work, as well as for making a blind stitch or hem a product);
• nylon (resistant to moisture, used for sewing shoes and bags);
• metallized (used for embroidery and creating decorative seams);
• synthetic (made from polyester (lavsan) and polyamide (kapron) fibers).

Additional Information! According to the method of finishing, sewing threads are matte, glossy, harsh and with a special finish. There are also black, white and colored. Harsh threads are not dyed or processed. They are used for technical purposes. Threads with a special finish are given special properties, such as fire resistance, light reflection, aromatization, etc. Glossy threads are shiny and smooth, matte ones have a slight sheen

Features of denim

Jeans - a dense fabric woven from yarn of two colors. The fabric is based on cotton fibers. To make the material soft and elastic, elastin, lycra, viscose and other synthetic components are added.

Description of the varieties of denim:

• denim (a classic version of jeans with an interlacing of dyed and white fibers);
• broken twill (embossed and dense fabric with a special herringbone weave);
• jean or gin (poor quality cotton material, dyed one color);
• stretch (made with the addition of elastin);
• shambri (thin and light material that is used for tailoring non-rough and summer clothes).
• eykru (natural cotton fabric that is not dyed).

What threads are best for sewing denim: types and manufacturers

When sewing a product, the threads are selected in accordance with the color and thickness of the material. The size is indicated by the marking. The thread number for thin denim is 50-60, for thick denim - 30-40. To work with the canvas, special needles with number 100 are used.

What threads to sew jeans:

• reinforced (characterized by high density and low hairiness, marking - 65LH, 65LH-1 and 65 LL);
• polyester (help to overcast sections);
• polyester (suitable for darning).

Note! Reinforced threads are marked depending on the composition. For example, LH means that the thread is made of lavsan and cotton, LL - from flax and lavsan, LSh - from lavsan and wool. They are suitable for almost all sewing machines, including domestic ones like "Podolsk" and "Chaika"

Manufacturers of sewing threads for jeans:

• Amann (reinforced polyester sewing thread Saba 50 and Saba 35, reinforced cotton-polyester thread Rasant 75, contrast thread for finishing stitches Saba 30);
• Gutermann (reinforced cotton-polyester threads H120, H75, H35);
• Coats (reinforced polyester thread Epic 60, reinforced cotton-polyester thread "Dual Duty" T-80N, cotton thread "Admiral" T-60);
• Rain Bow (polyester staple sewing thread "Ada" A 202/120), etc.

Important! Thread numbers for darning jeans - 30 and 40

How to choose

The sewing thread should match the shade and thickness of the sewn material. When buying, pay attention to the marking and quality of the thread. In big cities, such as Moscow, there are specialized clothing stores.

Having gone for threads, you can take with you a piece of denim, from which you plan to sew a product. This will make it easier to choose the right shade and explain to the seller what you need.

The thread size is selected according to the needle number. The standard needle size for jeans is 100, but depending on the density of the material, #90 and #110 can also be used (the thicker the fabric, the higher the number).

Note! You can not sew with old Soviet threads. Often they do not fit modern sewing machines and spoil the product.

Information about the quality of threads in the Russian market

The largest manufacturers of sewing threads are the German companies Gütermann, Amann AC, Madeira. High-quality products are also produced by Coats from the UK. However, Russian manufacturers can also find good quality threads.

Decent products are supplied by:

• OJSC "Soviet Star";
• OAO "Petronit" (Research Institute of threads);
• LLC "Mosnitki";
• JSC "PNK im. Kirov";
• Euronit LLC.

How to check the quality of sewing thread

The thread is inspected before use. It should be smooth, without villi, lumps and compacted areas. A high-quality thread for denim has the same thickness along the entire length. When stretched, it does not break, but stretches smoothly.

To better see how the thread looks, create a contrasting background. To do this, a light thread is applied to a dark fabric, and a dark one to a light one. Also use a loupe or magnifying glass.

How to sew with denim

Stitching denim should be done with the right thread and needle. The quality of the stitching and the appearance of the product depend on this. If you need to process a thickening, it is first steamed with an iron or lightly beaten with a hammer.

• slightly loosen the tension of the upper thread;
• use a foot with a guide;
• if skipped stitches occur, put the needle not all the way, but a little lower;
• the upper conveyor will help to pass the thickening.

For sewing denim materials, strong threads are needed. These include reinforced, polyester and polyester. The number of thread for jeans depends on the thickness of the fabric. For thinner fabrics - No. 50-60, for thick ones - No. 30-40. The video below shows what other threads sew jeans.

Here you can buy denim thread at a great price. Favorable offer from the Internet company MAG - wholesale denim threads. We have been working in the sewing accessories market for 10 years, therefore we select for our customers only the best products from trusted manufacturers. You can select consumables for production of various scales: the order will be completed as soon as possible in the required volume. Therefore, we invite buyers who are directly involved in the production process (workshops, ateliers, workshops) and retailers (including online stores) to cooperate.

What denim thread to buy and why?

In sewing, specialized threads may be required to fulfill certain purposes. Jeans are designed to create high-quality finishes in various products - shoes, bags, leather goods, knitwear. It is based on a particularly durable polyester core, which has a high-quality braid. Therefore we offer buy denim threads in bulk, which will become an excellent material for giving any product high performance. They have several advantageous properties:

• resistant to abrasion;
• color fastness to various influences;
• good sewing characteristics;
• not prone to shrinkage during heat and wet processing;
• will become a guarantee of unbreakable seams in finishing and sewing;
• can be used in any typewriter, regardless of class.

Economical purchase - wholesale denim threads

The task of the MAG online store is to provide customers with the opportunity to choose a product that meets all requirements and is affordable. So in the directory you can buy denim thread by selecting the desired color and quantity. It should be borne in mind that the minimum packaging of this product is a set of several coils. If you want to save extra, you can order wholesale denim threads. Bulk purchases provide additional benefits:

1. Individual entrepreneurs and legal entities can place an order at a discount. Its size will depend entirely on the purchased volume: the larger the amount, the higher the discount - up to 8%. If you are a large wholesale buyer or dealer, we will provide a special discount, which is negotiated on an individual basis.
2. Both firms in Moscow and regional companies can make a purchase. Residents of the capital can pick up their order for free from the warehouse or by courier delivery. Representatives of the regions can use the services of transport companies.
3. By becoming our regular customer, you will receive a cumulative discount card that allows you to significantly save on purchases.
4. The site regularly hosts promotions for certain groups of goods.